top of page
1157063.webp

GTECHNIQ Protection Options 

csl.png

GTECHNIQ Crystal Serum Light Ceramic Coating

 Swirl mark and chemical resistant

Chemical bond allowing for a greater strength and durability

✓ Exceptional glass like reflections

Rated 3-5 years average durability 

 Provides slick finish 

GTECHNIQ Crystal Serum Light Ceramic Coating

 When it comes to adding gloss, resisting swirls, contaminant and dirt repellency, Gtechniq Crystal Serum Light is the pinnacle in paint protection. With a durability of 3-5 years and the cure time being 12-24 hours, this coating is incomparable to others on the market and one that we swear by!

 Swirl and chemical resistant

Chemical bond allowing for a greater strength and durability

✓ Exceptional glass like reflections

Rated 3-5 years average durability 

 Provides slick finish 

IMG_7042.jpg
276167720_449641763603123_5008515455148222917_n.jpg

​​​​​​Please note:

 

  • We will only apply this coating once *AT MINIMUM* a Stage 1 Exterior Detail has been completed. This is because we will need to prep and correct the paintwork before hand to allow for best results

  • Once applied the coating will need up to 24 hours to thoroughly cure and be fully protected. The vehicle can get wet after 12 hours.

Prices are based on vehicle size, coverage & location. Please see our detailing services for more info.

GTECHNIQ Smart Fabric Protect 

​​​​​​Please note:

 

  • Surfaces need to be completely dry after deep cleaned for up to 48 hours before application. Therefore an application appointment will need to be arranged. The vehicle can be used during this process.

  • Once applied the coating will need up to 24 hours to thoroughly dry and be fully protected.

Prices are based on vehicle size, coverage & location.

✓ Helps to keep your fabric surfaces clean and in good condition

✓ Kills 99.9% of bacteria upon application

✓ Guards against stains and spillages 

✓ Any liquid on the coated surface will fall off or can be simply be wiped    away 

✓ Spillages create a beading effect on surfaces

High performance Smart Fabric Protector specifically designed for your car interior. With added BioCote® antimicrobial technology, treated surfaces will kill 99.9% of bacteria. Smart Fabric Protect offers up to 6 -12  months durability depending on the wear of the area. SFP treated surfaces leaves no remnants of a liquid spillages and moisture simply falls off or can be wiped away.

GTECHNIQ Leather Guard

High performance Leather Guard specifically designed for your car interior. With added BioCote® antimicrobial technology, treated surfaces will kill 99.9% of bacteria. Leather Guard offers 3 to 12 months durability depending on how high-wear the area protected is. High wear areas are recommended a top up every 3 months.

​​​​​​Please note:

 

  • Surfaces need to be completely dry after deep cleaned before application. 

  • Once applied the coating will need up to 1 hours to dry and be fully protected.

Prices are based on vehicle size, coverage & location.

✓ Helps to keep your leather clean and in good condition

✓ Adds UV Protection

✓ Guards against dye transfer

✓ Does not alter the look or feel of the leather

✓ Helps prevent fading

✓ Helps prevent abrasion damage

EjJvge2XkAIg8M1.jpg

GTECHNIQ C4 Trim Restorer

C4 utilises a chemical bond to become an extension of the plastic molecule it is protecting. Unlike many trim products, C4 is an exceptionally thin optically clear film that will not add an unattractive gloss to the surface. Instead it restores 90% trim to the best it possible can whilst protecting against fading.

 Up to 2 Years durability

 Restores trim to "as new" condition

 Use on all exterior trim​ - Bumpers, mud flaps, engine bay etc,

Clear thin film - No sticky residue

gtechniq-c4-permanent-trim-restorer-[3]-4778-p.jpg
c4 trim restorer.png

Please note:

  • Once applied the coating will need up to 12 hours to thoroughly cure and be fully protected.

* Prices are based on vehicle size, coverage & location.

GTECHNIQ G1 ClearVision Glass

G1 uses a chemical bond instead of sitting on the glass. G1 ClearVision Smart Glass is extremely durable, the hydrophobic function improves wet weather visibility helping to improve safety and eye strain. It also makes removing contaminants from the glass such as ice, bugs and tree sap much easier.

Please note:

  • Once applied the coating will need up to 12 hours to thoroughly cure and be fully protected.

* Prices are based on vehicle size, coverage & location. 1 layer on Windscreen Only starts from £30, for full car coverage, price will start at £85

✓ Hydrophobic (Water Repellent)

✓ Durable chemical bond

✓ Lasts up to an average of 20,000 miles​ 

✓ Makes wet weather driving safer and less tiring

Untitled-1.png

Legal Stuff!

Please Note: We are not affiliated or involved with Gtechniq in any way. We solely believe that to get amazing results for our clients, we need to use tried, tested and proven products. Gtechniq protection products work best for us, so we use them on our clients vehicles. We do not sell the individual products, we only sell our services in which we use these products, This is an informative page in which intended use is for our clients to know which products we use during our services, not a marketplace.

bottom of page