​Wheel arches deep cleaned, scrubbed and flushed.

​

Tyre faces deep cleaned & dressed with a high performance tyre gel to rejuvenate the rubber, prevent fading and leave a finished look.

​

Alloy faces, inner barrel and spokes cleaned with a dedicated wheel cleaner & iron fallout remover.​​

​

Lug nuts and callipers cleaned with a soft detailing brush and wheel cleaner.​

​

Pressured rinse to remove any debris and loose dirt.

​​

PH neutral Snow foam pre wash applied and allowed to soak on the vehicle to loosen any dirt, then pressured rinsed.

​​

All crevices, grills, badges, emblems and window rubbers cleaned with a dedicated soft detailing brush and cleaning solution to remove lodged dirt.

​​

Contact wash using a PH neutral premium shampoo, 2 buckets with grit guards & a luxury soft mitt to ensure no swirls or scratches, then pressured rinsed.

​​

Door shuts cleaned and dried.

​​

Chemical decontamination process: Road tar remover applied. Iron fallout remover applied to cleanse the paintwork.

​

Paintwork manually decontaminated using a clay bar to remove any remaining contaminants and leave the paintwork clean and slick before polishing.

​​

Final pressured rinse then dry with a luxurious microfibre drying towel and air blower to remove trapped water from crevices, badges and grills​

Full Process - PART 2 : CORRECTIONS & FINISHING

A heavy cutting compound (Menzerna Heavy Cut) is applied to every section of the paintwork via a variety of sized cutting pads with multiple sized Dual Action Machine Polishers to eliminate swirls, haziness, light marring and light scratches. Our goal is to achieve up to at least a 90% increase in paintwork clarity and imperfection reduction.

​

Once the cutting process has been completed, a refining polish (Menzerna Super Finish Plus) is applied to the paintwork with a soft finiishing foam pad to remove any remaining buffer trails, holograms or love mark marrings from the previous stage and leave a polished glass like finish that you could use as a mirror!

​

Door pillars and headlights are also lightly polished to remove any haziness or light swirling.

​

Exterior Plastics and Trims dressed and protected against UV damage and "greying"  to leave a natural rejuvenated finish.

​

Chrome exhaust tips polished.

​

a paintwork prep degreaser is applied to the paint to remove any remaining oils from the compound, leaving the paintwork ready for a wax sealant / spray ceramic application.

​

Wax fused sealant / ceramic spray applied for up to 6 months UV Protection and weathering protection whilst creating a super slick and glossy finish! (Top ups included in monthly plans) 

​

All Compound, Polish and Refining solutions have no fillers, waxes, silicone or glazes in them. This means that any corrections that happen are permanent corrections and not just fillers that will be removed over time. ​

​

Our custom car care guide will be offered upon completion to help assist you in maintaining your paintwork finish if you wanted to complete it yourself in the future.

FROM £450 - 3 Days